Introduction to the Spring Cloud Netflix – Eureka

Reading Time: 5 minutes

Introduction

In this blog, we’ll introduce client-side service discovery via “Spring Cloud Netflix Eureka.

Client-side service discovery allows services to find and communicate with each other without hard-coding the hostname and port. The only ‘fixed point’ in such an architecture is the service registry, with which each service has to register.

One drawback is that all clients must implement a certain logic to interact with this fixed point. This assumes an additional network round trip before the actual request.

With Netflix Eureka, each client can simultaneously act as a server to replicate its status to a connected peer. In other words, a client retrieves a list of all connected peers in a service registry, and makes all further requests to other services through a load-balancing algorithm.

To be informed about the presence of a client, they have to send a heartbeat signal to the registry.

Eureka Server

Implementing a Eureka Server for service registry is as easy as:

  1. adding spring-cloud-starter-netflix-eureka-server to the dependencies
  2. enabling the Eureka Server in a @SpringBootApplication by annotating it with @EnableEurekaServer
  3. configuring some properties

Let’s do it step by step.

First, we’ll create a new Maven project and put the dependencies in it. Notice that we’re importing the spring-cloud-starter-parent to all the projects described in this tutorial:

<dependency>
    <groupId>org.springframework.cloud</groupId>
    <artifactId>spring-cloud-starter-netflix-eureka-server</artifactId>
</dependency>

<dependencyManagement>
    <dependencies>
        <dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-starter-parent</artifactId>
            <version>Greenwich.RELEASE</version>
            <type>pom</type>
            <scope>import</scope>
        </dependency>
    </dependencies>
</dependencyManagement>

Then we’ll create the main application class:

@SpringBootApplication
@EnableEurekaServer
public class EurekaServerApplication {
    public static void main(String[] args) {
        SpringApplication.run(EurekaServerApplication.class, args);
    }
}

Finally, we’ll configure the properties in YAML format, so an application.yml will be our configuration file:

server:
  port: 8761
eureka:
  client:
    registerWithEureka: false
    fetchRegistry: false

Here we’re configuring an application port; the default one for Eureka servers is 8761. We’re telling the built-in Eureka Client not to register with itself because our application should be acting as a server.

Now we’ll point our browser to http://localhost:8761 to view the Eureka dashboard, where we’ll later inspect the registered instances.

Eureka Client

For a @SpringBootApplication to be discovery-aware, we have to include a Spring Discovery Client (for example, spring-cloud-starter-netflix-eureka-client) into our classpath.

Then we need to annotate a @Configuration with either @EnableDiscoveryClient or @EnableEurekaClient. Note that this annotation is optional if we have the spring-cloud-starter-netflix-eureka-client dependency on the classpath.

The latter tells Spring Boot to use Spring Netflix Eureka for service discovery explicitly. To fill our client application with some sample-life, we’ll also include the spring-boot-starter-web package in the pom.xml and implement a REST controller.

But first, we’ll add the dependencies. Again, we can leave it to the spring-cloud-starter-parent dependency to figure out the artifact versions for us:

<dependency>
    <groupId>org.springframework.cloud</groupId>
    <artifactId>spring-cloud-starter-netflix-eureka-starter</artifactId>
</dependency>
<dependency>
    <groupId>org.springframework.boot</groupId>
    <artifactId>spring-boot-starter-web</artifactId>
</dependency>

Here we’ll implement the main application class:

@SpringBootApplication
@RestController
public class EurekaClientApplication implements GreetingController {

    @Autowired
    @Lazy
    private EurekaClient eurekaClient;

    @Value("${spring.application.name}")
    private String appName;

    public static void main(String[] args) {
        SpringApplication.run(EurekaClientApplication.class, args);
    }

    @Override
    public String greeting() {
        return String.format(
          "Hello from '%s'!", eurekaClient.getApplication(appName).getName());
    }
}

And the GreetingController interface:

public interface GreetingController {
    @RequestMapping("/greeting")
    String greeting();
}

Instead of the interface, we could also simply declare the mapping inside the EurekaClientApplication class. The interface can be useful though if we want to share it between server and client.

Next, we have to set-up an application.yml with a configured Spring application name to uniquely identify our client in the list of registered applications.

We can let Spring Boot choose a random port for us because later we’ll access this service with its name. 

Finally, we have to tell our client where it has to locate the registry:

spring:
  application:
    name: spring-cloud-eureka-client
server:
  port: 0
eureka:
  client:
    serviceUrl:
      defaultZone: ${EUREKA_URI:http://localhost:8761/eureka}
  instance:
    preferIpAddress: true

We decided to set up our Eureka Client this way because this kind of service should be easily scalable later on.

Now we’ll run the client, and point our browser to http://localhost:8761 again to see its registration status on the Eureka Dashboard. By using the Dashboard, we can do further configuration, like link the homepage of a registered client with the Dashboard for administrative purposes. The configuration options, however, are beyond the scope of this article:

Feign Client

To finalize our project with three dependent microservices, we’ll now implement a REST-consuming web application using Spring Netflix Feign Client.

Think of Feign as a discovery-aware Spring RestTemplate using interfaces to communicate with endpoints. These interfaces will be automatically implemented at runtime, and instead of service-urls, it’s using service-names.

Without Feign, we would have to autowire an instance of EurekaClient into our controller with which we could receive service-information by service-name as an Application object.

We would use this Application to get a list of all instances of this service, pick a suitable one, and then use this InstanceInfo to get the hostname and port. With this, we could do a standard request with any http client:

@Autowired
private EurekaClient eurekaClient;

@RequestMapping("/get-greeting-no-feign")
public String greeting(Model model) {

    InstanceInfo service = eurekaClient
      .getApplication(spring-cloud-eureka-client)
      .getInstances()
      .get(0);

    String hostName = service.getHostName();
    int port = service.getPort();

    // ...
}

RestTemplate can also be used to access Eureka client-services by name, but this topic is beyond this article.

To set up our Feign Client project, we’ll add the following four dependencies to its pom.xml:

<dependency>
    <groupId>org.springframework.cloud</groupId>
    <artifactId>spring-cloud-starter-feign</artifactId>
</dependency>
<dependency>
    <groupId>org.springframework.cloud</groupId>
    <artifactId>spring-cloud-starter-netflix-eureka-client</artifactId>
</dependency>
<dependency>
    <groupId>org.springframework.boot</groupId>
    <artifactId>spring-boot-starter-web</artifactId>
</dependency>
<dependency>
    <groupId>org.springframework.boot</groupId>
    <artifactId>spring-boot-starter-thymeleaf</artifactId>
</dependency>

The Feign Client is located in the spring-cloud-starter-feign package. To enable it, we have to annotate a @Configuration with @EnableFeignClients. To use it, we simply annotate an interface with @FeignClient(“service-name”) and auto-wire it into a controller.

A good method for creating such Feign Clients is to create interfaces with @RequestMapping annotated methods and put them into a separate module. This way they can be shared between server and client. On the server-side, we can implement them as @Controller, and on the client-side, they can be extended and annotated as @FeignClient.

The spring-boot-starter-web and spring-boot-starter-thymeleaf dependencies are used to present a view containing fetched data from our REST service.

This will be our Feign Client interface:

@FeignClient("spring-cloud-eureka-client")
public interface GreetingClient {
    @RequestMapping("/greeting")
    String greeting();
}

Here we’ll implement the main application class, which simultaneously acts as a controller:

@SpringBootApplication
@EnableFeignClients
@Controller
public class FeignClientApplication {
    @Autowired
    private GreetingClient greetingClient;

    public static void main(String[] args) {
        SpringApplication.run(FeignClientApplication.class, args);
    }

    @RequestMapping("/get-greeting")
    public String greeting(Model model) {
        model.addAttribute("greeting", greetingClient.greeting());
        return "greeting-view";
    }
}

This will be the HTML template for our view:

<!DOCTYPE html>
<html xmlns:th="http://www.thymeleaf.org">
    <head>
        <title>Greeting Page</title>
    </head>
    <body>
        <h2 th:text="${greeting}"/>
    </body>
</html>

The application.yml configuration file is almost the same as in the previous step:

spring:
  application:
    name: spring-cloud-eureka-feign-client
server:
  port: 8080
eureka:
  client:
    serviceUrl:
      defaultZone: ${EUREKA_URI:http://localhost:8761/eureka}

Now we can build and run this service. Finally, we’ll point our browser to http://localhost:8080/get-greeting and it should display something like the following:

Hello from SPRING-CLOUD-EUREKA-CLIENT!

TransportException: Cannot Execute Request on Any Known Server’

While running Eureka servers, we often run into exceptions like:

com.netflix.discovery.shared.transport.TransportException: Cannot execute request on any known server

Basically, this happens due to the wrong configuration in application.properties or application.ymlEureka provides two properties for the client that can be configurable:

  • registerWithEureka: If we set this property as true, then while the server starts, the inbuilt client will try to register itself with the Eureka server.
  • fetchRegistry: If we configure this property as true, the inbuilt client will try to fetch the Eureka registry.

Now when we start up the Eureka server, we don’t want to register the inbuilt client to configure itself with the server.

If we mark the above properties as true (or just don’t configure them, as they’re true by default), then while starting the server, the inbuilt client tries to register itself with the Eureka server and also tries to fetch the registry, which isn’t available yet. As a result, we get TransportException.

So we should never configure these properties as true in the Eureka server applications. The correct settings that should be put in application.yml are:

eureka:
  client:
    registerWithEureka: false
    fetchRegistry: false

Conclusion

In this blog, we learned how to implement a service registry using Spring Netflix Eureka Server and register some Eureka Clients with it.

Reference Link :- https://en.wikipedia.org/wiki/Microservices

knoldus

Written by 

KRISHNA JAISWAL is Software Consultant Trainee at Knoldus. He is passionate about JAVA , MYSQL , having knowledge of C , C++ and much more. He is recognised as a good team player, a dedicated and responsible professional, and a technology enthusiast. He is a quick learner & curious to learn new technologies. His hobbies include reading Books , listening Music and playing Cricket .